Hot
Brand: Sensepeek
Model: HBD4004
Spare parts for your PCBite holder, fresh set of insulation washers and bottom caps.
INCLUDED:
1x Set of yellow insulations washers (8 pcs)
1x Set of bottom caps (4 pcs)
..
€5.15
Hot
Brand: Sensepeek
Model: HBD4022
A set of two extra PCBite PCB holders with insulation washers. Included: 2x PCBite holder
1x Set of yellow insulation washers for two holders..
€31.50
Brand: Sensepeek
Model: HBD4021
The extra large 297 x 420 mm (DIN A3) base plate comes with a pre-fitted insulation cover so your PCBs are well protected when powered up.
The pre fitted insulation cover adds a higher level of protection compared to having a painted metal surface as it is more resistant to wear and and less risk ..
€61.95
Brand: Sensepeek
Model: HBD4017
If you are looking for extra protecting when working with powered PCBs, want to clean up your worksurface or eliminate reflection from microscope lightning when working with small PCBs under microscope this accessory is the solution.
The baseplate included in all PCBite kits have one mirror polishe..
€8.30
Brand: Sensepeek
Model: HBD4011
2psc complete SP10 handsfree probes with one red and one black probe head (positive and negative) packed together with a set of red/black banana cables.
Intended for connection directly to multimeter or power supply. These probes are perfect for those who already has a metal base plate and h..
€30.45
Brand: Sensepeek
Model: HBD4002
Perfect for holding your PCB for soldering or inspection.
INCLUDED:
4× PCBite holder
1x Small Base plate (A5)
1x Set of yellow insulation washers
1x Micro fiber cloth..
€61.95
Brand: Sensepeek
Model: HBD4010
A set of color coded cable holders in eight(8) different colors to easily identify the correct channel on your measurement tool and to keep cables away from your PCB under test.
Two high quality test hooks that fits directly on the SP10 cables or used as ground hooks to the SP100 and SP200 probes...
€15.75
Brand: Sensepeek
Model: HBD4005
The first truly handsfree probe! Makes instant measurements or long triggering sessions a breeze.
No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release.
Saves time and frustrati..
€61.95
Brand: Sensepeek
Model: HBD4007
Perfect for holding your PCB for soldering or inspection.
INCLUDED:
4× PCBite holder
1x Standard Base plate (A4)
1x Set of yellow insulation washers
1x Micro fiber cloth..
€72.45
Brand: Sensepeek
Model: HBD4008
2x4 Wire harness that fits perfectly between PCBite probes and your Saleae logic analyzer or anything else with an IDC 2,54 (0.1") pitch pin header.
2x4 Wire harness that fits perfectly between PCBite probes and your Saleae logic analyzer or anything else with an IDC 2,54 (0.1") pitch pin header.&nb..
€10.50
Brand: Sensepeek
Model: HBD6011
Two complete handsfree SQ10 probes with one red and one black probe (positive and negative) packed together with a set of red/black banana cables intended for connection directly to a multimeter or power supply.
The new SQ series of handsfree PCBite probes from Sensepeek are insulated, come with in..
€40.95
Brand: Sensepeek
Model: HBD4003
The first truly handsfree probe! Makes instant measurements or long triggering sessions a breeze.
No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release.
Saves time and frustration ..
€124.95