Brand: ECS
Model: 770'400'000
PLASTIC is based on an acrylic resin particularly suitable for the electronic industry. It forms a transparent, flexible and protective film that is resistant to acids, salt, fungus, corrosive vapors, thermal stress, mechanical abuse, alkalis, alcohols, moisture, and tough environmental conditions. ..
€16.00
Brand: JBC
Model: FL-A
FL is a flux brush designed to be used in the preparation of printed circuits prior to soldering an SMD component, especially flat pack integrated circuits.All you need to do is fill the barrel with the flux. JBC pens have a retractable valve in them so you have complete control of how much flux you..
€12.00
Brand: Wetec
Model: OKFP-1
Original Pen - Genuine Model
Flux pen for filling. The fine tip ensures precise application of the flux. Indispensable in every repair shop.
Capacity 7ml
Supplied without flux...
€18.50
Brand: JBC
Model: FL15
FL15 is a liquid flux water based designed to be used in the preparation of printed circuits prior to soldering a SMD component, especially flat pack integrated circuits.How to use:1. Clean and degrease the surfaces to be soldered.2. Use the brush to apply the flux to the integrated circuit pads.3. ..
€6.00
Brand: Thermaltronics
Model: RMP-1
Cartridge Removal Pad - Thermaltronics
Compatible with Metcal AC-CP2..
€8.00
Brand: Interflux
Model: MTTIPTIN025
The Interflux® Tip Tinner is designed to keep wettable soldering tips in a good condition. It cleans off carbonized flux residues and simultaneously re-tins oxidized soldering tips of hand (de-)soldering equipment. The Interflux® Tip Tinner does not contain halogens or abrasive materials tha..
€8.50
Brand: Thermaltronics
Model: TMT-TC-2
The TMT-TC-2 Tip Tinners is a compressed tablet of pure tin and ammonia phosphate formulation in a metal container with lid. It has a self adhesive pad on the underside to allow it to be affixed on, or near the work station.
Removes tip oxidation
No-Clean compatible formulation
&nbs..
€8.50
Brand: HB Direct
Model: IF8300
Interflux® IF 8300 is a no-clean, halide free and colophony free gel flux with minimal residues after soldering. The gel flux is available in different viscosities for different applications. It can be applied by printing, dispensing, dipping or by brush. IF 8300 is typically used for rework and..
€25.00
Brand: Wetec
Model: CW8100
The Chemtronics flux pen is suitable for the precise and controlled application of flux. The marking tip allows for accurate application of flux to the surface. The flux can be removed with the CW9100 Flux Remover Pen or Flux-Off® Flux Remover. It applies a patented non-corrosive,..
€12.50
Brand: Interflux
Model: IF8300-4
Interflux® IF 8300 is a no-clean, halide free and colophony free gel flux with minimal residues after soldering. The gel flux is available in different viscosities for different applications. It can be applied by printing, dispensing, dipping or by brush. IF 8300 is typically used for rework and..
€33.00
Brand: Wetec
Model: SUD5503501004
Thixotropic one-component epoxy adhesive for surface mounting electronic components on SMD circuit boards. Dispensable and suitable for screen printing/stencil printing. It doesn't pull strings and has dimensionally stable adhesive dots. The cured adhesive has very good electrical pro..
€25.00
Brand: Wetec
Model: CW7270
ITW Chemtronics Thermal Paste, Silicone-Free
Silicone-free thermal compound facilitates heat transfer away from electrical/electronic components and into heatsinks. This paste exhibits no creep or migration over a wide temperature range. Thickened with a proprietary thermally conductive z..
€15.00